Water Softener Installation

Water Softener Installation

Protect your home from Basingstoke’s 288mg/l ultra-hard water. Eliminate limescale, lower bills, and extend appliance lifespan.

GEOLOGICAL DATA

Living with Basingstoke’s Hard Water Supply

Because the local supply is pumped directly from regional chalk aquifers, it carries a heavy mineral payload, resulting in a hardness level of 288mg/l.

The Limescale Tax

Hard water leaves rock-like deposits inside boiler heat exchangers and cylinder heating elements, forcing systems to work harder and increasing heating costs by up to 12%.

Appliance Degradation

Washing machines and dishwashers in Hampshire break down significantly faster as mineral crust cakes their heating elements, leading to early component burnouts.

Cleaning Frustration

White scum crusting around the bases of taps, shower screens, and inside kettles requires aggressive, daily scrubbing and costly chemical cleaners to manage.

Basingstoke Hard Water Effects
PRODUCT FEATURES

How a Twin-Tank Water Softener Protects Your Home

Most homeowners prefer a compact, non-electric twin-tank system that fits neatly right under the kitchen sink next to the main internal stopcock.

Twin-Tank Design

How it works: One tank cleans your water while the other regenerates.

Benefit: 24/7 continuous soft water supply with no downtime.

Non-Electric Operation

How it works: Powered solely by the moving pressure of your water.

Benefit: No running costs, no electrical wiring, and nothing to plug in.

Block Salt Feed

How it works: Uses simple, ergonomic salt blocks instead of heavy, messy granular bags.

Benefit: Loading new salt takes less than 10 seconds.

Under sink Water Softener Installation
INSTALLATION WORKFLOW

My Seamless Installation Process

I provide tidy, compliant copper/plastic loop configurations with zero mess left behind.

STEP 1

Free Home Assessment

I check your incoming water pressure, locate your main internal stopcock (usually under the kitchen sink), and measure the available cabinet space.

01
STEP 2

Plumbing & Bypass Loop

I install a dedicated three-valve bypass loop into your existing copper or plastic pipework, allowing you to isolate the softener easily if you ever move house.

02
STEP 3

Hard Water Drinking Tap

Because water softeners introduce small amounts of sodium during ion-exchange, I keep your main kitchen cold tap un-softened for drinking and cooking as standard.

03
STEP 4

Calibration & Testing

I commission the twin tanks, run a test cycle to ensure a perfect watertight seal, and leave you with your first batch of block salt to get started immediately.

04
LOCAL DOMESTIC FITTING

Installing Softeners in Basingstoke & Hampshire

I install water softeners in homes across all hard-water hotspots where water pressure and scale issues are notorious.

I regularly service households and carry out neat cupboard fitting across Hatch Warren, Beggarwood, Chineham, Lychpit, Old Basing, Kempshott, Oakley, Brighton Hill, and Sherborne St John.

Our Local Scale Hotspots Served

Hatch Warren Beggarwood Chineham Lychpit Old Basing Kempshott Oakley Brighton Hill Sherborne St John
SOFTENER FAQ

Water Softener FAQs

Read common answers regarding twin-tank configurations, electricity, and salt feeds.

No, my twin-tank water softeners are completely non-electric. They are powered solely by the kinetic energy and moving pressure of your incoming water supply. There are zero running electricity costs and nothing to plug in.
Refill rates depend on your household's water consumption, but an average family of four typically uses about one block of salt per person per month (roughly two blocks loaded every 3 to 4 weeks). Loading the blocks takes less than 10 seconds.
Yes, softened water is safe for the majority of people. However, because the ion-exchange process introduces a very small amount of sodium, I install a dedicated hard-water bypass tap at your kitchen sink as standard. This ensures you always have a source of un-softened water for drinking, cooking, and preparing baby formula.

Ready to eliminate limescale in Basingstoke?

Get a free cupboard survey and a fixed-price water softener install quote today.

Call 07766 557060

Need Urgent Heating or Plumbing Help?

A Clarke Plumbing & Heating LTD has served domestic and commercial clients for over three decades. Talk to me now to arrange an inspection!

AClarke Plumbing & Heating LTD

Professional support for domestic and light industrial systems. Boiler installs, heating tune-ups, custom pipings, and fast fixes.

07766 557060

Useful Links

Contact Info

© 2026 A Clarke Plumbing & Heating LTD. All rights reserved.

Registered in England and Wales. Company number 17055246.
Registered office address: 117 Porter Road, Basingstoke, England, RG22 4JT.
Brand plumbing and gas services marketed under Gas Safe registration.